
Location: Bengaluru
Company: Stryker
What You Will Do
- Interact with the various product development teams and understand the requirements for SI / PI / EMC / EMI / Motor simulation
- Perform the SI / PI / EMC / EMI analyses using the commercial tools, e.g., ANSYS, Dassault System, Mathwork and Cadance
- Model preparation, Pre & post-layout analysis and the interpretation of the results. Verify the results for accuracy and convergence
- Validate the analysis results against closely equivalent international standards, experimental results or analytical solution as available
- Develop methods, tools, and procedures to shorten the simulation time for complex problems
- Create analysis reports, reference manual and lessons learnt document
- Participate in simulation workshops, forums, training & conferences both internal & external
What You need
- Must have skills:
- Strong Electronics Basics, with knowledge of Digital/Analog/Mixed/High speed signals, multi-board simulation, Motor simulation, thermal simulation, battery simulation and Antenna simulation.
- Good knowledge of interfaces like DDR2/3/4/5, RS232/422/485, SPI, I2C, NAND/NOR Flash/PCI Express/SERDES.
- Should be aware of signal integrity issues i.e. effects of packaging, board parasitic, crosstalk, noise, grounding and shielding, etc. Should know power integrity issues like IR drop and decoupling analysis.
- Good knowledge of system-level simulations like Radiated emission simulation and conducted emission simulation and ESD simulations. Should have experience in the simulation of different types of motors, including PMDC and BLDC motors.
- Good to have skills
- Experience in board thermal management and battery simulation.
- Prior experience in the medical domain and EMI/EMC physical testing is a plus.
Education: B. Tech. /M.S. in Electronics Engineering
Experience: 4 -7 years in electrical simulation – SI / PI / EMC / EMI Analysis